Butler Creek Scope Cover Size Guide⁚ An Overview
This guide helps you find the perfect Butler Creek scope cover. Accurate measurements are crucial for a proper fit. Use the provided charts and instructions to determine the correct size for your scope’s objective and eyepiece lenses.
Understanding Butler Creek’s Sizing System
Butler Creek employs a numerical sizing system for its scope covers, often corresponding to lens diameter measurements in inches and millimeters. Each number represents a specific diameter range suitable for various scopes. Their charts usually list scope models alongside the recommended cover size, simplifying the selection process. However, inconsistencies may exist across different charts, so carefully cross-referencing is advisable. Precise measurements using calipers are necessary for optimal results, especially when dealing with scopes not explicitly listed on readily available charts. Remember that a slight difference in measurement can necessitate choosing between two sizes. Always prioritize accuracy; a poorly fitting cover will not adequately protect your scope lenses, negating its primary purpose.
Importance of Accurate Measurements
Precise measurements are paramount when selecting Butler Creek scope covers. Using a caliper or micrometer to determine your scope’s objective and eyepiece lens diameters ensures an accurate fit. Inaccurate measurements can lead to purchasing a cover that’s either too large, offering insufficient protection and potentially hindering scope use, or too small, failing to fit entirely. Many users report issues with sizing charts, emphasizing the need for independent verification. While Butler Creek provides charts, relying solely on them without personal measurements might lead to disappointment. Therefore, taking careful measurements before ordering is strongly advised to avoid returns or incompatibility issues. This proactive approach guarantees a snug and secure fit, maximizing the protective function of the cover.
Using a Butler Creek Size Chart
Butler Creek size charts, often available online or in retail stores, list scope models and their corresponding cover sizes. These charts typically specify objective and eyepiece lens diameters in both inches and millimeters. If your specific scope model is listed, finding the correct size is straightforward. However, if your scope isn’t listed, you must measure the lenses directly. Remember that slight discrepancies may exist between charts, so using your own measurements is crucial. When your measured diameter falls between two listed sizes, select the smaller one for a secure fit. Always double-check your measurements and compare them to the chart meticulously before making a purchase to prevent any sizing errors. Some users have found inconsistencies across different charts, reinforcing the importance of independent verification through personal measurement.
Locating the Right Size Chart
Butler Creek size charts are found on their website, at many retailers, or through third-party resources. Downloadable PDFs and online guides are also readily available.
Online Resources and Downloads
The official Butler Creek website is your primary resource for accurate sizing information. Look for a dedicated “Scope Cover Size Chart” or a similar section within their product support or downloads area. These charts usually provide detailed measurements in both inches and millimeters, matching specific Butler Creek models to objective and eyepiece lens diameters. Often, these charts are available as downloadable PDFs for convenient offline access. Many online retailers who sell Butler Creek products also include these charts on their product pages, providing additional access points for customers seeking the right fit. Remember to always double-check measurements before purchasing to ensure compatibility with your specific scope model. Some third-party websites dedicated to firearms and optics also host these charts, offering yet another avenue for finding the information you need. Consider cross-referencing information from multiple sources for added confirmation.
Retailer Availability
Many sporting goods retailers that carry Butler Creek products also provide access to their sizing charts. Visit your local store or browse their online catalogs. In-store, you might find a physical chart displayed near the scope covers themselves, making it easy to compare your scope’s dimensions directly. Online retailers frequently include Butler Creek’s sizing charts within their product descriptions or as downloadable files linked to the product pages. This offers a convenient way to verify compatibility before ordering. Remember that stock availability varies by retailer and location, so it’s always a good idea to call ahead or check online inventory before visiting a physical store. Even if your chosen retailer doesn’t explicitly display the chart, their customer service may be able to provide it directly or guide you to a reliable online source. This dual-access approach ensures you can find the information you need regardless of your preferred shopping method.
Third-Party Resources and Guides
While Butler Creek provides official sizing charts, numerous third-party websites and forums offer additional resources. These independent sources may provide alternative measurement guides, user reviews detailing their experiences with specific scope cover sizes, and comparisons between Butler Creek’s sizing and that of other brands. Online forums dedicated to shooting sports or specific firearm models often feature discussions about scope cover selection, with users sharing their measurements and recommendations. Remember to always cross-reference information from multiple sources to ensure accuracy, as individual experiences and interpretations may vary. Pay close attention to the source’s credibility and the date of the information, as sizing standards or product lines can change over time. By leveraging these supplemental resources, you can gain a more comprehensive understanding of Butler Creek sizing and make a more informed decision.
Measuring Your Scope for Optimal Fit
Precise measurements are key. Use a ruler or caliper to determine your scope’s objective and eyepiece diameters in millimeters or inches. Consult the Butler Creek chart for the best fit.
Measuring Objective Lens Diameter
Accurately measuring your scope’s objective lens diameter is paramount to selecting the correctly sized Butler Creek scope cover. The objective lens is the larger lens at the front of your riflescope. To measure it, use a ruler or, for greater precision, a caliper. Ensure the measuring tool is placed perpendicular to the lens surface to avoid inaccurate readings. Take multiple measurements at different points around the lens’s circumference to account for any slight inconsistencies in its shape. Record the largest measurement obtained as this will be the critical dimension for selecting the appropriate scope cover size. Refer to the Butler Creek size chart, ensuring the units of measurement (inches or millimeters) match those you used for your measurement. Remember, even slight discrepancies can result in an ill-fitting cover.
Measuring Eyepiece Diameter
Precisely measuring your scope’s eyepiece diameter is as crucial as measuring the objective lens for a proper Butler Creek scope cover fit. The eyepiece is the smaller lens at the rear of your riflescope, through which you look. Use a ruler or, preferably, a caliper for accurate measurement. Position the measuring tool perpendicular to the eyepiece lens’s surface to avoid errors. Take several measurements at different points around the circumference to account for any variations. Record the largest measurement obtained; this is the critical dimension to match against the Butler Creek size chart. Ensure the units (inches or millimeters) on the chart correspond to your measurement units. A correctly sized eyepiece cover ensures a snug fit while allowing smooth operation of the eyepiece’s focusing mechanisms. Minor measurement differences can significantly impact the cover’s fit, so meticulous measurement is key.
Interpreting Measurements and Choosing the Correct Size
After obtaining your objective and eyepiece lens diameter measurements, carefully consult the Butler Creek size chart. The chart correlates lens diameters (in inches or millimeters) with corresponding Butler Creek cover sizes. If your measurements fall precisely on a listed size, selecting the appropriate cover is straightforward. However, if your measurements fall between two listed sizes, choose the smaller size. A slightly snug fit is preferable to a loose one, ensuring optimal protection and preventing accidental slippage. Remember that the provided measurements are external diameters; ensure your measurements reflect this. Some charts offer additional model-specific information, which should be considered in conjunction with your diameter measurements. If you’re still unsure, contacting Butler Creek directly for assistance is always recommended. Their expertise can help you avoid costly mistakes.
Troubleshooting Sizing Issues
Encountering difficulties finding the right Butler Creek scope cover size? This section addresses common problems and provides solutions for achieving a perfect fit for your valuable optics.
Dealing with In-Between Measurements
Sometimes, your scope’s measurements fall between two Butler Creek sizes listed on their charts. This is a common issue, and there’s a simple solution. The general recommendation is to always opt for the smaller size. A slightly snug fit is preferable to a cover that’s too large and may slip off or not provide adequate protection. A cover that is too small will be difficult to install and may damage your scope. Choosing the smaller size ensures a secure fit, maximizing the protective capabilities of the Butler Creek cover. Remember to carefully measure your scope’s objective lens and eyepiece diameters using a ruler or caliper for the most accurate results. If you’re still unsure after checking the measurements, contacting Butler Creek directly for assistance is always a good option. They can provide expert guidance to ensure you select the perfectly fitting cover.
Addressing Inconsistent Sizing Charts
Occasionally, you might encounter discrepancies between different Butler Creek size charts found online or in retail stores. These inconsistencies can stem from various factors, including printing errors, updates to the product line, or even differences in measurement methods. If you find conflicting information, prioritize charts directly from the official Butler Creek website or those provided by authorized retailers. These sources are generally the most reliable and up-to-date. Cross-referencing multiple charts can help identify any anomalies. Remember, precise measurements of your scope’s objective and eyepiece diameters are paramount. Always double-check your measurements using a caliper or a high-quality ruler to minimize errors. If inconsistencies persist despite your best efforts, don’t hesitate to reach out to Butler Creek’s customer support for clarification and assistance in selecting the appropriate size.
Contacting Butler Creek for Assistance
If you’ve exhausted all other options and still face difficulties determining the correct Butler Creek scope cover size for your optics, contacting Butler Creek directly is your best course of action. Their customer service representatives possess in-depth knowledge of their product lines and sizing systems. They can provide personalized guidance based on your specific scope model and measurements. Before contacting them, gather all relevant information, including your scope’s make, model, objective lens diameter, and eyepiece diameter. Having these details readily available will expedite the process and ensure a more efficient resolution. You can typically find contact information, such as phone numbers, email addresses, or online contact forms, on the official Butler Creek website. Don’t hesitate to utilize this resource; they are there to assist you in finding the perfect fit for your valuable equipment.